Introduction: Automotive glass lifters are generally composed of the following parts: control mechanism (rocker arm or electric control system), transmission mechanism (gear, toothed plate or rack, gear flexible shaft meshing mechanism), glass lifting mechanism (lifting arm, motion bracket), glass support mechanism (glass bracket) and stop spring, balance spring. The basic working route of a glass lifter is the control mechanism → transmission mechanism → lifting mechanism → glass support mechanism. The balance spring is used to balance the gravity of the glass to reduce the operating force; The stop spring installed between the small gear and the support seat is used to hold the glass (stop) and ensure that it stays in the required position.
Working principle:
Working principle of electric glass lifter: Electric fork arm glass lifter: composed of ordinary manual glass lifter, reversible DC motor, and reducer, etc. The working principle is to turn on the electric motor, which drives the reducer to output power. The glass installation bracket is moved by the active arm and the passive arm or by pulling the steel wire rope, forcing the door and window glass to move up or down in a straight line. Transmission route: joystick - small gear - sector gear - lifting arm (active or passive arm) - glass installation groove plate - glass lifting motion.
Function:
(1) Adjust the opening size of car doors and windows; Therefore, the glass lifter is also known as a door and window adjuster, or a window shaking mechanism.
(2) Ensure smooth lifting of the car door glass and smooth opening and closing of doors and windows at any time;
(3) When the elevator is not working, the glass can stay in any position.
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
A double-stacked self-locking washer is a special mechanical connector designed to prevent bolts from loosening, especially in high-vibration or high-load environments.It consists of two spring washers nested inside each other in an S-shaped configuration. The outer spring washer has ends that bend inwards, while the inner spring washer has ends that bend outwards, creating a two-way self-locking feature.The working principle of this washer is based on elastic deformation. When placed between connecting parts, the inner curved part of the outer spring ring interlocks with the outer curved part of the inner spring ring, creating a locking force that prevents the connecting parts from loosening under vibration or load.The advantages of the double-stacked self-locking washer include high reliability, easy installation, and a wide range of applications.It is suitable for various mechanical connections, such as threaded connections and pin connections, and is widely used in industrial production and machinery manufacturing, especially in the automotive manufacturing process, where it is often used to connect engine and chassis systems to improve the safety and reliability of the car.
Electronic connector stamping parts, Electronic housing stamping parts
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
Double Fold Self Locking Washer Material: carbon steel, stainless steel, etc. Size: M5-M39, 1/4”-1-1/2”,etc. Standard: DIN25201,GB/T955 Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, black oxide, plain, etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Metal Stamping parts products Automotive parts stamping parts,Home appliance housing stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
A double-stacked self-locking washer is a special mechanical connector designed to prevent bolts from loosening, especially in high-vibration or high-load environments.It consists of two spring washers nested inside each other in an S-shaped configuration. The outer spring washer has ends that bend inwards, while the inner spring washer has ends that bend outwards, creating a two-way self-locking feature.The working principle of this washer is based on elastic deformation. When placed between connecting parts, the inner curved part of the outer spring ring interlocks with the outer curved part of the inner spring ring, creating a locking force that prevents the connecting parts from loosening under vibration or load.The advantages of the double-stacked self-locking washer include high reliability, easy installation, and a wide range of applications.It is suitable for various mechanical connections, such as threaded connections and pin connections, and is widely used in industrial production and machinery manufacturing, especially in the automotive manufacturing process, where it is often used to connect engine and chassis systems to improve the safety and reliability of the car.
Electronic connector stamping parts, Electronic housing stamping parts
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
