| Material | Carbon Steel, Alloy Steel, Stainless Steel, Aluminum, Brass, etc. |
| Color | Black / Blue / Yellow Zinc Plated / Plain etc. |
| Standard | DIN, ASTM,JIS,BS,AS,ISO,GB,Nonstandard bolt(according to your order),etc. |
| Surface Finished | Black,Zinc plated,Copper plating,Phosphating,Mechanical galvanized,hot dipped galvanized,daromet etc |
| Mark | According to customer’s requirement |
| Delivery time | Within 30 days after receive your deposit. |
| Package | By carbon or gunny bag then on wooden pallet or according to client’s requirement |
| Professional: | We are specialized in fastener products 20 years of experience in this field |
| Size: | According to customer request |
| CustomerService: | 24-hours standby, Critical listening your every suggestion or demand and feedback ASAP. |
Product Introduction
Spring washers, also known as spring washers, play an important role in the mechanical and screw industries. It is usually used to increase the contact area between products, enhance fastening effect, and reduce friction damage between components. The main functions of the cushion include preventing loosening, shock absorption, preventing air leakage, serving as a buffer, and providing safety protection in specific environments. The material of the spring pad is diverse, including stainless steel and carbon steel (usually iron), and there are also various sizes to choose from, such as M3, M4, M5, M6, M8, M10, M12, M14, M16, etc. The national standard GB/T 94.1-2008 specifies the technical conditions for spring pads to ensure their quality and stability of performance.
The application scenarios of spring washers are wide, especially in situations where the pre tightening force of bolts is not high and the dynamic load is small. When the connected part is relatively soft, the sharp edge of the spring washer can be embedded to prevent loosening. In addition, when the clamping length of the bolt is short and the stress relaxation of the bolt is significant, if the elastic force of the washer is not significantly different from the pre tightening force of the bolt, the spring washer can compensate for this stress relaxation. However, in high-strength bolt connections, due to the smaller end face of the spring washer compared to the flat washer, under the same pre tightening force and external load conditions, it may cause surface deformation of the parts, thereby reducing the pre tightening force of the bolt and gradually causing loosening. Therefore, when choosing whether to use spring washers, it is necessary to consider the specific application scenario and bolt type comprehensively.
In addition to spring washers, there are other types of washers such as flat washers and anti loosening washers, each with different application scenarios and advantages. Flat washers are mainly used to prevent loosening of bolts and nuts, while anti loosening washers have stronger anti loosening capabilities. Understanding the characteristics and usage scenarios of these gaskets can help us choose the appropriate gasket type based on specific needs to ensure the reliability and safety of the connection
Main materials
Usually, 65MN spring steel or 70 # carbon steel, 3Cr13, stainless steel materials SUS304 or SUS316, as well as phosphor bronze materials can be used.
Main purpose
Used under the nut to prevent it from loosening.
It is stated in national standards.
The methods to prevent nuts (or bolts) from automatically loosening in mechanical design and production include:
1. Add spring washers; (Simple and easy to do)
2. Use hexagonal slotted nuts and split pins; (Year on year increase in processing steps)
3. Add a stop washer; (Year on year increase in processing steps)
4. Insert the steel wire into the hexagonal head hole of the hexagonal bolt. (Year on year increase in processing steps)
Spring washers are used for anti loosening, such as adding spring washers to the bolts connecting the motor and the machine base, because if the motor vibrates without spring washers, the nuts will loosen. Generally, fasteners on equipment with vibration are equipped with spring washers, while flanges generally do not require washers. The presence or absence of spring washers on flanges is related to the medium flowing through the pipeline. If it is prone to pulse generation, it is best to add spring washers. There are also high-speed fluid pipelines with frequent changes in diameter, so do not generalize. On some valves, spring washers are required to be added to the flange of the packing box cover, and the selection of spring washers is included in the Quick Easy Optimization automation selection.
Main differences
Spring washers can play a role in preventing loosening and increasing pre tightening force, while flat washers do not have this function. They can be used to increase the fastening contact area, prevent friction between bolts and workpieces, protect the surface of connecting parts from scratching the workpiece surface when bolts and nuts are tightened.
But some important connections, such as those that rely mainly on compression to generate friction and transmit power, cannot use spring pads. Using them will reduce the rigidity of the connection and may even lead to accidents. When the strength of the connected component is low, flat washers or flange bolts are used to increase the contact area. When there is vibration, pulse, or significant temperature fluctuations in the medium, spring washers must be used.
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Butterfly buckles and double ring buckles (also known as butterfly buckles, connecting rings, or linking rings) are mainly used to connect the chains, rings, and hooks in chain rigging. The design of this connecting ring allows for the pivot connection of a rotating ring body at each end of a connecting ring body. Its characteristic is that the body is a hollow cylindrical body, and the two rotating ring bodies are formed by a protruding embedded part at one end of a linear rod, and the other end is bent into a ring and then wound around a straight section for positioning.
Product Name Nylon lock Nut Grade: 4.8,8.8,10.9,12.9 Size: M4–M100 Surface treament: Black,zinc plated,zinc(yellow)plated,H.D.G etc,Dacroment Material: Carbon steel,alloy steel,stainless steel,ec
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Product Name Expansion Anchor Shipping Address China Finish wzp, blue zp, etc. MOQ 10000pcs Material Carbon steel or customized Standard DIN GB,etc Size M4 M5 M6 M8 or customized
Electronic connector stamping parts, Electronic housing stamping parts
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product name Cylindrical locating pin round head cylindrical pin dowel stainless steel cylindrical positioning pin Size M1-M48,According to the drawing provided by the customer. Grade 4.8, 6.8, 8.8, 10.9, 12.9, A2-70, A4-80 Standard ISO, GB, BS, DIN, ANSI,JIS, Non-standard Material 1. Stainless steel: 201,303,304,316,410 2. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045 3. Copper: H62,H65,H68 4. Aluminum: 5056, 6061, 6062, 7075 5. According to customer demand Surface treatment Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodize,Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G. ) etc. Package Plastic bag / small box +outer carton +pallets After-sales Service We will follow up
Product Name: Hex Head Coach Screws 50mm 304 Grade Stainless Steel Lag Screw Bolts For Wood DIN571 Material: Carbon Steel, Stainless Steel, Brass, etc Surface Treatment: Zinc Plated /According To Your Requirement Size: M1 – M20 /According To Your Requirement Standard: DIN GB ISO BS, ANSI Application: Building, Industry, Machinery, Electronic,etc Quality Policy All the parts manufactured 100% inspection from OQC before shipping. Non-Standards OEM is Available, According to Drawing or Samples
Product Name M30 M33*3.5mm Pitch Metric A4-70 Stainless Steel Hex Castle Nut DIN935 Material Stainless steel:SS210,SS304,SS316,SS316L,SS410 Color Polish, Passication Standard DIN,ASME,ASNI,ISO Grade A2-70,A2-80,A4-70,A4-80 Finished Polish, Passication Thread Coarse,Fine Used Building Industry Machinery
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Butterfly buckles and double ring buckles (also known as butterfly buckles, connecting rings, or linking rings) are mainly used to connect the chains, rings, and hooks in chain rigging. The design of this connecting ring allows for the pivot connection of a rotating ring body at each end of a connecting ring body. Its characteristic is that the body is a hollow cylindrical body, and the two rotating ring bodies are formed by a protruding embedded part at one end of a linear rod, and the other end is bent into a ring and then wound around a straight section for positioning.
Product Name Nylon lock Nut Grade: 4.8,8.8,10.9,12.9 Size: M4–M100 Surface treament: Black,zinc plated,zinc(yellow)plated,H.D.G etc,Dacroment Material: Carbon steel,alloy steel,stainless steel,ec
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
