| Size (Diameter) | M6, M8, M10, M12, M16, M20 |
| Length | 40mm – 300mm |
| Material | Carbon Steel, Stainless Steel |
| Sample | Free |
| Delivery | 30~45 Days |
| Packaging | 1. Small Box+ Carton+ Pallet 2. According to Customer’s Requirement |
Size of Anchor
| Size | Drill Hole Diameter [mm] | Length [mm] | Pull Out Load |
| M6 | 6 | 40-100 | 850 |
| M8 | 8 | 50-120 | 1150 |
| M10 | 10 | 60-200 | 1500 |
| M12 | 12 | 80-220 | 2300 |
| M16 | 16 | 100-300 | 3400 |
| M20 | 20 | 100-300 | 5400 |
Car repair geckos are fixed devices used to create stable connections on walls or other surfaces, also known as expansion bolts or expansion bolts. It is usually composed of bolts, nuts, washers, and outer sleeves, among which the outer sleeve is a hollow metal tube, usually made of stainless steel or other corrosion-resistant materials. The working principle of the car repair gecko is to use the expansion of the outer sleeve to fix objects. During installation, the bolt is inserted into the pre drilled hole, and then the nut is tightened. The groove or cut of the outer sleeve is squeezed during the tightening process of the nut, thereby tightly fitting with the inner wall of the hole and forming a firm connection. This connection method is suitable for very sturdy surfaces such as concrete and brick walls, and can provide adjustable tightness.
The characteristics of the car repair gecko include:
Easy to install: No special tools required, only a drill bit and a hammer or impact drill are needed for installation.
High load-bearing capacity: suitable for medium to heavy projects, such as installing large equipment or hanging ceiling grids.
Universality: Provides multiple sizes and styles to meet different application needs.
Strong support: When installed correctly, the expansion of the car repair gecko in the pre drilled concrete hole provides an incredible and powerful support.
The application fields of car repair geckos are very wide, including but not limited to concrete and dense natural stone, metal structures, bottom plates, support plates, brackets, railings, windows, curtain walls, machines, beams, beams, brackets, etc. Its thread is longer, easier to install, and is usually used in heavy-duty facilities. To obtain reliable fastening force, it is necessary to ensure that the clamp ring fixed on the gecko is fully expanded, and the expansion clamp ring cannot fall off the rod or twist or deform in the hole. The maximum safe load shall not exceed 25% of the calibrated tensile value obtained from testing under the condition of cement strength of 260~300kgs/cm2.
The design of the car repair gecko includes an extended wedge inserted into a pre drilled hole in the concrete. By tightening the screw to generate pulling force, a wedge/conical compression clip is used for expansion to generate frictional force for fixation. This design allows car repair geckos to adapt to different installation needs while providing stable connections and strong support.
The standards for repairing geckos mainly include their material, testing strength, maximum load, and application areas.
Material: Car repair geckos are usually made of stainless steel, carbon steel, and other metal materials, and the selection of these materials ensures that they have good strength and corrosion resistance.
Test strength: The calibration tensile value of the car repair gecko is tested under the condition of cement strength of 260~300kgs/cm ². This test strength standard ensures its reliability and safety in various applications.
Maximum load: The value of the safe load shall not exceed 25% of the calibration value. This regulation limits the maximum load-bearing capacity of the car repair gecko under specific conditions to prevent safety hazards caused by overload.
Application areas: Car repair geckos are suitable for the installation and fixation of various structures and facilities such as concrete and dense natural stone, metal structures, bottom plates, support plates, brackets, railings, windows, curtain walls, machines, beams, beams, brackets, etc. Its wide range of application areas reflects its versatility and practicality.
In summary, the standards for car repair geckos not only include specific requirements for their material and testing strength, but also include limitations on their maximum load and a wide range of application areas. These standards together ensure the safety and effectiveness of car repair geckos in various applications.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
Application General Industry Product name Eye nuts Size M4, 5, 6, 8, 10,any size Type Eye Nuts Incoterms FOB CNF CIF EXW
Introduction: Automotive glass lifters are generally composed of the following parts: control mechanism (rocker arm or electric control system), transmission mechanism (gear, toothed plate or rack, gear flexible shaft meshing mechanism), glass lifting mechanism (lifting arm, motion bracket), glass support mechanism (glass bracket) and stop spring, balance spring. The basic working route of a glass lifter is the control mechanism → transmission mechanism → lifting mechanism → glass support mechanism. The balance spring is used to balance the gravity of the glass to reduce the operating force; The stop spring installed between the small gear and the support seat is used to hold the glass (stop) and ensure that it stays in the required position.
T-bolts are a common type of fastener widely used in various mechanical equipment and engineering...
Type:Standard Solid Wheels,Universal wheels Material:Nylon/PVC/PU/carbon steel/stainless steel Place of Origin:Handan , China 2/2.5/3/4/5 inch universal/directional/with brake Usage Wide Usage Packaging and delivery Packaging Details caster wheels,all goods simple pack in the carton with poly bag or as customer’s request Customized support OEM, ODM, OBM
Metal Stamping parts products Building hardware stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
