The window regulator motor is the power source of the window glass lifting system, responsible for driving the glass up and down. It is usually installed inside the car body or in the car door, connected to the window glass through steel wire ropes or guide rails, to achieve the control of the window lifting. The working principle of a motor is based on electromagnetic induction and changes in the direction of current. By changing the direction of current, the motor’s forward and reverse rotation can be controlled, thereby achieving the up or down movement of the car window. The start and stop of the motor are controlled by the switch inside the car, making it convenient for the driver to operate. In addition, in order to protect the motor, wire rope, and guide rail, a lubrication system is also installed in the system to provide lubricating oil for these components, reduce friction, and extend service life.
Working principle:
The working principle of the glass lifter motor is based on the principle of electromagnetic induction. By passing current through the coils on the stator, a magnetic field is generated, which interacts with the permanent magnets on the rotor, causing the rotor to start rotating. This rotation is then driven up or down by mechanical structures such as reducers, wire ropes, or sliders to achieve the function of lifting and lowering the window glass. The design of the window regulator motor takes into account factors such as compact structure, light weight, low noise, fast lifting speed, and long service life to meet the needs of limited interior space and frequent operation in automobiles.
Specifically, when the power is turned on, the current passes through the coils on the stator to generate a magnetic field. This magnetic field interacts with the permanent magnets on the rotor, generating a torque that causes the rotor to start rotating. The rotation of the rotor is further reduced in speed but increased in torque through a reducer, and then driven up or down along a linear trajectory by mechanical structures such as wire ropes or sliders to drive the window glass. This design not only achieves smooth lifting of the car window, but also provides fast and reliable lifting speed, while maintaining low noise levels and improving passenger comfort.
In addition, the design of the glass lifter motor also considers safety and durability. For example, by adopting high-quality bearings and sealing designs, maintenance requirements are reduced and motor life is extended. At the same time, the design of motors and reducers also considers thermal management and heat dissipation issues to prevent overheating and damage.
In general, the working principle of the window regulator motor is to generate power through electromagnetic induction, and transmit the power to the window glass through a reducer and mechanical structure to achieve the lifting function of the window. This design not only provides a convenient operating experience, but also considers safety and durability, meeting the requirements of modern cars for window lifting systems.
Purpose:
The electric motor of the car electric glass lifter can be used in the automotive industry and also in the lifting of office seats.
Communication equipment stamping parts
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Electronic housing stamping parts, Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard DIN / GB / UNC / BSW /JIS etc. Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 8.8 10.9 12.9 A2-70 A4-70 A4-80 etc. Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Spring Washer Material: carbon steel, stainless steel,brass, etc. Size: M2-M100, 1/4-2-1/2 Standard: DIN127, ASTM, ISO Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, black oxide, plain, etc.
Product Wheel / Lug Nut Standard ASTM / ANSI / ISO / DIN Material Carbon Steel, Stainless Steel, Alloy Steel Mark According to customer’s requirement Size Any size Package Cartons&pallets or according to customer’s requirement.
Type:SCISSOR JACK,User Car Jack Place of Origin:Handan, China Material :Stainless steel,Carbon steel Usage Wide Usage Packaging and delivery Packaging Details caster wheels,all goods simple pack in the carton with poly bag or as customer’s request
Product Name Colorful Hex Acorn Cap Dome Nut DIN1587 304 Stainless Steel Red Black Blue Grey CapNut Finish Silver,Plain, black, zinc plated/according to your requirement Material Stainless Steel,Alloy steel,Carbon Steel,Brass,Aluminum and So on Size M3-M24,or non-standard as request&design Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc Grade 4.8,8.8,10.9,12.9.etc Certification ISO9001,DIN1587 Package according to customers requirement Lead Time 7-15 work days after order confirmed Notes Special specifications and marks can be made according to customers requirements;
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
Production name Wedge anchor bolt Standard DIN,ASTM/ANSI JIS EN ISO,AS,GB Material Stainless Steel: SS304, SS316, SS316L, Carbon Steel:DIN:Gr.4.8,8.8,10.9,12.9; Surface Zinc(Yellow,White,Blue,Black),Hot Dip Galvanized(HDG),Black, Geomet,Dacroment,Anodization,Nickel plated,Zinc-Nickel plated,Gleitmo615;PTFE(Blue,red) Production Process Machining and CNC for Customized fastener Customized Products Lead time Busy season:30-45days,Slack seaon:10-20days;In stock Package Small Packing+Carton Packing+Pallet/wooden case
Communication equipment stamping parts
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Electronic housing stamping parts, Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard DIN / GB / UNC / BSW /JIS etc. Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 8.8 10.9 12.9 A2-70 A4-70 A4-80 etc. Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
