The window regulator motor is the power source of the window glass lifting system, responsible for driving the glass up and down. It is usually installed inside the car body or in the car door, connected to the window glass through steel wire ropes or guide rails, to achieve the control of the window lifting. The working principle of a motor is based on electromagnetic induction and changes in the direction of current. By changing the direction of current, the motor’s forward and reverse rotation can be controlled, thereby achieving the up or down movement of the car window. The start and stop of the motor are controlled by the switch inside the car, making it convenient for the driver to operate. In addition, in order to protect the motor, wire rope, and guide rail, a lubrication system is also installed in the system to provide lubricating oil for these components, reduce friction, and extend service life.
Working principle:
The working principle of the glass lifter motor is based on the principle of electromagnetic induction. By passing current through the coils on the stator, a magnetic field is generated, which interacts with the permanent magnets on the rotor, causing the rotor to start rotating. This rotation is then driven up or down by mechanical structures such as reducers, wire ropes, or sliders to achieve the function of lifting and lowering the window glass. The design of the window regulator motor takes into account factors such as compact structure, light weight, low noise, fast lifting speed, and long service life to meet the needs of limited interior space and frequent operation in automobiles.
Specifically, when the power is turned on, the current passes through the coils on the stator to generate a magnetic field. This magnetic field interacts with the permanent magnets on the rotor, generating a torque that causes the rotor to start rotating. The rotation of the rotor is further reduced in speed but increased in torque through a reducer, and then driven up or down along a linear trajectory by mechanical structures such as wire ropes or sliders to drive the window glass. This design not only achieves smooth lifting of the car window, but also provides fast and reliable lifting speed, while maintaining low noise levels and improving passenger comfort.
In addition, the design of the glass lifter motor also considers safety and durability. For example, by adopting high-quality bearings and sealing designs, maintenance requirements are reduced and motor life is extended. At the same time, the design of motors and reducers also considers thermal management and heat dissipation issues to prevent overheating and damage.
In general, the working principle of the window regulator motor is to generate power through electromagnetic induction, and transmit the power to the window glass through a reducer and mechanical structure to achieve the lifting function of the window. This design not only provides a convenient operating experience, but also considers safety and durability, meeting the requirements of modern cars for window lifting systems.
Purpose:
The electric motor of the car electric glass lifter can be used in the automotive industry and also in the lifting of office seats.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Twisted shear high-strength bolts are a special type of bolt with high strength and excellent torsional shear performance, widely used in engineering structures.
size M2- M30 Material Carbon Steel, Stainless Steel, Titanium, Aluminum, Brass, etc Surface Treatment Plain, black, zinc plated/according to your requirement Standard DIN GB ISO JIS BA ANSI Grade SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8 8.8 10.9 12.9 Quality Policy All the parts manufactured 100% inspection from OQC before shipping. Thread Coarse, fine Used Building industry machinery electronic,etc Non-standards OEM is available, according to drawing or samples
Product Hexagon flange bolt Size M5-M20 Grade 4.8; 8.8; 10.9; 12.9; etc. ASME&AISI: 2; 5; 8 Material stainless steel, carbon steel Surface treatment Zinc plated, hot dip galvanized, black, Dacromet, etc. Standard DIN GB ISO JIS BA ASME ANSI ASTM Thread unc, unf, metric thread Usage building industry machinery Certification ISO9001, SGS, CTI, ROHS
Product Name Colorful Hex Acorn Cap Dome Nut DIN1587 304 Stainless Steel Red Black Blue Grey CapNut Finish Silver,Plain, black, zinc plated/according to your requirement Material Stainless Steel,Alloy steel,Carbon Steel,Brass,Aluminum and So on Size M3-M24,or non-standard as request&design Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc Grade 4.8,8.8,10.9,12.9.etc Certification ISO9001,DIN1587 Package according to customers requirement Lead Time 7-15 work days after order confirmed Notes Special specifications and marks can be made according to customers requirements;
Standard GB, DIN, ISO, ASTM, ASME, UNC,BSW Size M3-M50 or non-standard as request&design 1/4″,1/2″, 1-1/2″, 5/16″,7/16″, 5/8″, 1-1/4″, 3/4″, 3/8″, 1″ Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Products Socket Head Cap Screws Material carbon steel, stainless steel, Alloy Steel . Standard DIN912 /ISO4762 Diameter M2-M48 Length 4mm-400mm Pitch 0.4mm 0.45mm 0.5mm 0.7mm 0.8mm 1mm 1.25mm 1.5mm 1.75mm 2.0mm 2.5mm 3.0mm Finish Zinc Plated .Black Oxide,etc. Grade 4.8, 8.8 Grade. 10.9 Grade.12.9 Grade Head Type Cylindrical Hexagon Socket Cap Head Thread Type Fully Threaded , Partially Thread Features Exceptional strength and durability,High Tensile ,Corrosion-resistance Abrasion-resistance .Anti-rust.Easy installation Application Ideal for use in automotive.construction. Machinery.and other industries fastening applications where high-strength fasteners are needed Packing Poly bags.Box.Cartons.Wooden Pallets
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
12.9 Grade Steel Zinc Plating DIN 912 Hex Socket Head Cap Screws Diameter : M3- M16 Material : Carbon steel Finish : Blue/yellow zinc plated Length : 6 – 100mm OEM : Offer Prices vary in different sizes, please contact us before order!
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
