| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Drywall screw, tapping screw Size:M2.9-M4.8 Length:12mm-55mm, 1-3/4”～3”. Material: carbon steel Finish: white zinc plated, blue zinc plated, black phosphating , etc.
Product Name M30 M33*3.5mm Pitch Metric A4-70 Stainless Steel Hex Castle Nut DIN935 Material Stainless steel:SS210,SS304,SS316,SS316L,SS410 Color Polish, Passication Standard DIN,ASME,ASNI,ISO Grade A2-70,A2-80,A4-70,A4-80 Finished Polish, Passication Thread Coarse,Fine Used Building Industry Machinery
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Circuit board bracket stamping parts
Product Name: Hex Head Coach Screws 50mm 304 Grade Stainless Steel Lag Screw Bolts For Wood DIN571 Material: Carbon Steel, Stainless Steel, Brass, etc Surface Treatment: Zinc Plated /According To Your Requirement Size: M1 – M20 /According To Your Requirement Standard: DIN GB ISO BS, ANSI Application: Building, Industry, Machinery, Electronic,etc Quality Policy All the parts manufactured 100% inspection from OQC before shipping. Non-Standards OEM is Available, According to Drawing or Samples
The window regulator motor is the power source of the window glass lifting system, responsible for driving the glass up and down. It is usually installed inside the car body or in the car door, connected to the window glass through steel wire ropes or guide rails, to achieve the control of the window lifting. The working principle of a motor is based on electromagnetic induction and changes in the direction of current. By changing the direction of current, the motor’s forward and reverse rotation can be controlled, thereby achieving the up or down movement of the car window. The start and stop of the motor are controlled by the switch inside the car, making it convenient for the driver to operate. In addition, in order to protect the motor, wire rope, and guide rail, a lubrication system is also installed in the system to provide lubricating oil for these components, reduce friction, and extend service life.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, BSW, UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Drywall screw, tapping screw Size:M2.9-M4.8 Length:12mm-55mm, 1-3/4”～3”. Material: carbon steel Finish: white zinc plated, blue zinc plated, black phosphating , etc.
Product Name M30 M33*3.5mm Pitch Metric A4-70 Stainless Steel Hex Castle Nut DIN935 Material Stainless steel:SS210,SS304,SS316,SS316L,SS410 Color Polish, Passication Standard DIN,ASME,ASNI,ISO Grade A2-70,A2-80,A4-70,A4-80 Finished Polish, Passication Thread Coarse,Fine Used Building Industry Machinery
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Circuit board bracket stamping parts
