Email: admin@dewellfastener.com
Страница возврата
A bracket is a widely used support structure in various occasions, with diverse designs and materials that can meet different usage needs. Hardware brackets are usually made of metal materials such as stainless steel, aluminum alloy, etc., which have good durability and load-bearing capacity, ensuring the stability and safety of the bracket.
Working principle:
1.Load bearing principle: The primary function of a bracket is to bear and disperse the gravitational load of an object. A bracket is usually composed of multiple rods and connectors. Through reasonable structural design and material selection, the bracket can effectively withstand the external gravity applied to the object without deformation or damage.
2.Principle of Rod Connection: The rods in the bracket are connected by connectors to form a cohesive structure. Connections are usually made using bolts, rivets, welding, and other methods to ensure a firm and reliable connection between each member. In this way, the stability and strength of the bracket are ensured, and it can withstand the gravity and external loads of the object.
3.Distribution principle: When the bracket is working, it will distribute the gravity load of the object to multiple points, thereby reducing the load on each connection point. This distribution effect can reduce the load on a single connection point, decrease stress concentration at the connection, and thus improve the stability and reliability of the bracket.
4.Tightening principle: The connecting parts in the bracket need to be tightened correctly to maintain the stability and firmness of the structure. When installing the bracket, it is necessary to calculate and evaluate the reasonable tightening torque or force according to the design specifications and requirements, and conduct appropriate monitoring and adjustment during the installation process.
5.Balance principle: The design of the bracket takes into account the balance and stability of the object. When installing the bracket, it is necessary to ensure that the center of gravity of the bracket is located at the center of the object, and that the various connection points are balanced. By reasonable design and adjustment, the bracket can evenly bear the weight load of the object, avoiding imbalance and tilting phenomena.
Purpose:
Brackets are widely used as support structures for various occasions such as electronic devices, buildings, and furniture, playing a role in stability and safety.
Product name Cylindrical locating pin round head cylindrical pin dowel stainless steel cylindrical positioning pin Size M1-M48,According to the drawing provided by the customer. Grade 4.8, 6.8, 8.8, 10.9, 12.9, A2-70, A4-80 Standard ISO, GB, BS, DIN, ANSI,JIS, Non-standard Material 1. Stainless steel: 201,303,304,316,410 2. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045 3. Copper: H62,H65,H68 4. Aluminum: 5056, 6061, 6062, 7075 5. According to customer demand Surface treatment Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodize,Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G. ) etc. Package Plastic bag / small box +outer carton +pallets After-sales Service We will follow up
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Metal Stamping Parts Automobile interior stamping parts
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Circuit board bracket stamping parts
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
Introduction: Automotive glass lifters are generally composed of the following parts: control mechanism (rocker arm or electric control system), transmission mechanism (gear, toothed plate or rack, gear flexible shaft meshing mechanism), glass lifting mechanism (lifting arm, motion bracket), glass support mechanism (glass bracket) and stop spring, balance spring. The basic working route of a glass lifter is the control mechanism → transmission mechanism → lifting mechanism → glass support mechanism. The balance spring is used to balance the gravity of the glass to reduce the operating force; The stop spring installed between the small gear and the support seat is used to hold the glass (stop) and ensure that it stays in the required position.
Metal Stamping parts products, Automotive parts stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard Solid Wheels, Tire Style Wheels, caster wheels Material Nylon, PP, PVC Place of Origin Handan, China Customized support OEM, ODM Material:Nylon/PVC/PU/carbon steel/stainless steel Product name Caster Wheels Usage Wide Usage Packaging and delivery Packaging Details caster wheels,all goods simple pack in the carton with poly bag or as customer’s request
Product Name High Strength Carbon Steel Chemical Anchor Bolt Chemical Agent Expansion Screw For Metal Building Finish ZINC, Yellow Material Stainless steel, Carbon Steel Place of Origin China Guangdong Brand Name LPL Model Number LPL-HXLS Standard GB Product name High Strength Carton Steel Chemical Anchor Bolt Material Carbon Steel Application Industry&Building Length Customzied Packaging Carton + Pallet Brand Name LPL Size Customzied Product standards GB Standard
Product name Cylindrical locating pin round head cylindrical pin dowel stainless steel cylindrical positioning pin Size M1-M48,According to the drawing provided by the customer. Grade 4.8, 6.8, 8.8, 10.9, 12.9, A2-70, A4-80 Standard ISO, GB, BS, DIN, ANSI,JIS, Non-standard Material 1. Stainless steel: 201,303,304,316,410 2. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045 3. Copper: H62,H65,H68 4. Aluminum: 5056, 6061, 6062, 7075 5. According to customer demand Surface treatment Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodize,Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G. ) etc. Package Plastic bag / small box +outer carton +pallets After-sales Service We will follow up
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Metal Stamping Parts Automobile interior stamping parts
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
