| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
Flat Head Self Drilling Screw, Csk Head Phillips Drive Self Drilling Screws Size:M3.5-M6.3 Length:25mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,etc.
Electronic housing stamping parts, Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard GB, DIN, ISO, BSW,UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
A hinge is a mechanical device used to connect two solids and allow for relative rotation between them. It is usually composed of movable components or foldable materials. The main function of the hinge is to assist in the opening and closing of the cabinet, by connecting the rotating pair, so that the door or cover can swing on the fixed frame. According to different installation positions, hinges can be divided into door hinges and cabinet hinges. Door hinges are used to allow doors to rotate naturally and smoothly to open and close, while cabinet hinges have more functions and designs, such as rotating 360 degrees, adjusting the gap between doors up, down, and left and right.
Communication equipment stamping parts
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Type:SCISSOR JACK,User Car Jack Place of Origin:Handan, China Material :Stainless steel,Carbon steel Usage Wide Usage Packaging and delivery Packaging Details caster wheels,all goods simple pack in the carton with poly bag or as customer’s request
Size (Diameter) M6, M8, M10, M12, M16, M20 Length 40mm – 300mm Material Carbon Steel, Stainless Steel Sample Free Delivery 30~45 Days Packaging 1. Small Box+ Carton+ Pallet 2. According to Customer’s Requirement
Introduction: Automotive glass lifters are generally composed of the following parts: control mechanism (rocker arm or electric control system), transmission mechanism (gear, toothed plate or rack, gear flexible shaft meshing mechanism), glass lifting mechanism (lifting arm, motion bracket), glass support mechanism (glass bracket) and stop spring, balance spring. The basic working route of a glass lifter is the control mechanism → transmission mechanism → lifting mechanism → glass support mechanism. The balance spring is used to balance the gravity of the glass to reduce the operating force; The stop spring installed between the small gear and the support seat is used to hold the glass (stop) and ensure that it stays in the required position.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product Name U-bolt Package BAG/BOX Grade 4.6,4.8,5.6,6.8,8.8,9.8,10.9,12.9,etc Available Material 304 stainless steel,plastic,brass,carbon steel,titanium,aluminum,etc Surface treatment Zinc plated,Black oxide,Phosphate,Dacroment,etc Standard ISO,BS,ANSI, GB,DIN,JIS,Nonstandard Advantage OEM / ODM / customized service provided Quality control ISO standard,100% Whole range inspection through the production Certificate ISO9001,ISO14001,IATF16949,ROHS,etc
New energy vehicle stamping parts, Metal Stamping Parts
Flat Head Self Drilling Screw, Csk Head Phillips Drive Self Drilling Screws Size:M3.5-M6.3 Length:25mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,etc.
Electronic housing stamping parts, Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard GB, DIN, ISO, BSW,UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
A hinge is a mechanical device used to connect two solids and allow for relative rotation between them. It is usually composed of movable components or foldable materials. The main function of the hinge is to assist in the opening and closing of the cabinet, by connecting the rotating pair, so that the door or cover can swing on the fixed frame. According to different installation positions, hinges can be divided into door hinges and cabinet hinges. Door hinges are used to allow doors to rotate naturally and smoothly to open and close, while cabinet hinges have more functions and designs, such as rotating 360 degrees, adjusting the gap between doors up, down, and left and right.
