| Material | Carbon Steel, Alloy Steel, Stainless Steel, Aluminum, Brass, etc. |
| Color | Black / Blue / Yellow Zinc Plated / Plain etc. |
| Standard | DIN, ASTM,JIS,BS,AS,ISO,GB,Nonstandard bolt(according to your order),etc. |
| Surface Finished | Black,Zinc plated,Copper plating,Phosphating,Mechanical galvanized,hot dipped galvanized,daromet etc |
| Mark | According to customer’s requirement |
| Delivery time | Within 30 days after receive your deposit. |
| Package | By carbon or gunny bag then on wooden pallet or according to client’s requirement |
| Professional: | We are specialized in fastener products 20 years of experience in this field |
| Size: | According to customer request |
| CustomerService: | 24-hours standby, Critical listening your every suggestion or demand and feedback ASAP. |
Product Introduction
Spring washers, also known as spring washers, play an important role in the mechanical and screw industries. It is usually used to increase the contact area between products, enhance fastening effect, and reduce friction damage between components. The main functions of the cushion include preventing loosening, shock absorption, preventing air leakage, serving as a buffer, and providing safety protection in specific environments. The material of the spring pad is diverse, including stainless steel and carbon steel (usually iron), and there are also various sizes to choose from, such as M3, M4, M5, M6, M8, M10, M12, M14, M16, etc. The national standard GB/T 94.1-2008 specifies the technical conditions for spring pads to ensure their quality and stability of performance.
The application scenarios of spring washers are wide, especially in situations where the pre tightening force of bolts is not high and the dynamic load is small. When the connected part is relatively soft, the sharp edge of the spring washer can be embedded to prevent loosening. In addition, when the clamping length of the bolt is short and the stress relaxation of the bolt is significant, if the elastic force of the washer is not significantly different from the pre tightening force of the bolt, the spring washer can compensate for this stress relaxation. However, in high-strength bolt connections, due to the smaller end face of the spring washer compared to the flat washer, under the same pre tightening force and external load conditions, it may cause surface deformation of the parts, thereby reducing the pre tightening force of the bolt and gradually causing loosening. Therefore, when choosing whether to use spring washers, it is necessary to consider the specific application scenario and bolt type comprehensively.
In addition to spring washers, there are other types of washers such as flat washers and anti loosening washers, each with different application scenarios and advantages. Flat washers are mainly used to prevent loosening of bolts and nuts, while anti loosening washers have stronger anti loosening capabilities. Understanding the characteristics and usage scenarios of these gaskets can help us choose the appropriate gasket type based on specific needs to ensure the reliability and safety of the connection
Main materials
Usually, 65MN spring steel or 70 # carbon steel, 3Cr13, stainless steel materials SUS304 or SUS316, as well as phosphor bronze materials can be used.
Main purpose
Used under the nut to prevent it from loosening.
It is stated in national standards.
The methods to prevent nuts (or bolts) from automatically loosening in mechanical design and production include:
1. Add spring washers; (Simple and easy to do)
2. Use hexagonal slotted nuts and split pins; (Year on year increase in processing steps)
3. Add a stop washer; (Year on year increase in processing steps)
4. Insert the steel wire into the hexagonal head hole of the hexagonal bolt. (Year on year increase in processing steps)
Spring washers are used for anti loosening, such as adding spring washers to the bolts connecting the motor and the machine base, because if the motor vibrates without spring washers, the nuts will loosen. Generally, fasteners on equipment with vibration are equipped with spring washers, while flanges generally do not require washers. The presence or absence of spring washers on flanges is related to the medium flowing through the pipeline. If it is prone to pulse generation, it is best to add spring washers. There are also high-speed fluid pipelines with frequent changes in diameter, so do not generalize. On some valves, spring washers are required to be added to the flange of the packing box cover, and the selection of spring washers is included in the Quick Easy Optimization automation selection.
Main differences
Spring washers can play a role in preventing loosening and increasing pre tightening force, while flat washers do not have this function. They can be used to increase the fastening contact area, prevent friction between bolts and workpieces, protect the surface of connecting parts from scratching the workpiece surface when bolts and nuts are tightened.
But some important connections, such as those that rely mainly on compression to generate friction and transmit power, cannot use spring pads. Using them will reduce the rigidity of the connection and may even lead to accidents. When the strength of the connected component is low, flat washers or flange bolts are used to increase the contact area. When there is vibration, pulse, or significant temperature fluctuations in the medium, spring washers must be used.
item value Finish Black, ZINC Head Style Pan, Truss, Flat, Oval, Round, Binding Place of Origin China Hebei Brand Name XHY Model Number XHYDS Standard DIN Product name Fine/Coarse Thread Black Phosphate Flat Bugle Head Gypsum Board Drywall Screw for drywall phillips black Self Tapping Screw Material Carbon Steel C1022A Length 13mm~200mm Packing Small Packing+Carton Packing+Pallet MOQ 1 Ton Delivery time 7-10 Days Sample Freely Supplied Thread Fine Thread/Coarse Thread
Material Steel/Alloy/Bronze/Iron/ Carbon steel/etc Grade 4.8/ 6.8 /8.8 /10.9 /12.9 specification M0.8-M12 or 0#-1/2″ and we also produce according to customer’s requirement Standard ISO,DIN,JIS,ANSI/ASME,BS/Custom Color We can provide customized services according to your needs Surface Treatment We can provide customized services according to your needs Product Wheel / Lug Nut Mark According to customer’s requirement Package Cartons&pallets or according to customer’s requirement.
Finish Plain/Zinc-plated/Galvanized/etc. Measurement System Metric/Inch Place of Origin China Standard GB/ISO/ANSI/DIN/BS/JIS Material Carbon steel/Stainless steel/Brass/Aluminum/etc. Product Grade Grade A Strength Grade Level 4.8/8.8,etc. Applicable Industries Construction Industry Color Plain/White/Black/Gold/etc. Custom Support ODM/OEM
12.9 Grade Steel Zinc Plating DIN 912 Hex Socket Head Cap Screws Diameter : M3- M16 Material : Carbon steel Finish : Blue/yellow zinc plated Length : 6 – 100mm OEM : Offer Prices vary in different sizes, please contact us before order!
Materials: Carbon steel, Stainless steel Size: Customized as per detailed sizes or drawings MOQ: 1,000pcs above, depends on products or dimensions Sample lead time: 3-7 working days mostly Massive lead time: 10-15 working days mostly Trade terms: EXW/FOB/CIF/CNF/FCA/DAP/DDP/DDU Package: PE bags + brown carton + pallets or customized as demands
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
A jack is a lightweight lifting device that uses a steel lifting element as a working device to lift heavy objects within its travel through a top support or bottom support claw. Mainly used in factories, mines, transportation and other departments as vehicle repair and other lifting, support and other work. Its structure is lightweight, sturdy, flexible and reliable, and can be carried and operated by one person.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Hexagonal Self-drilling screw Diameter: 4.8mm, 5.5mm,6.3mm(10#,12#,14#), etc. Length: 16-300mm Material: carbon steel, stainless steel, etc. Finish: white zinc plated, yellow zinc plated, blue zinc plated, etc.
item value Finish Black, ZINC Head Style Pan, Truss, Flat, Oval, Round, Binding Place of Origin China Hebei Brand Name XHY Model Number XHYDS Standard DIN Product name Fine/Coarse Thread Black Phosphate Flat Bugle Head Gypsum Board Drywall Screw for drywall phillips black Self Tapping Screw Material Carbon Steel C1022A Length 13mm~200mm Packing Small Packing+Carton Packing+Pallet MOQ 1 Ton Delivery time 7-10 Days Sample Freely Supplied Thread Fine Thread/Coarse Thread
Material Steel/Alloy/Bronze/Iron/ Carbon steel/etc Grade 4.8/ 6.8 /8.8 /10.9 /12.9 specification M0.8-M12 or 0#-1/2″ and we also produce according to customer’s requirement Standard ISO,DIN,JIS,ANSI/ASME,BS/Custom Color We can provide customized services according to your needs Surface Treatment We can provide customized services according to your needs Product Wheel / Lug Nut Mark According to customer’s requirement Package Cartons&pallets or according to customer’s requirement.
Finish Plain/Zinc-plated/Galvanized/etc. Measurement System Metric/Inch Place of Origin China Standard GB/ISO/ANSI/DIN/BS/JIS Material Carbon steel/Stainless steel/Brass/Aluminum/etc. Product Grade Grade A Strength Grade Level 4.8/8.8,etc. Applicable Industries Construction Industry Color Plain/White/Black/Gold/etc. Custom Support ODM/OEM
12.9 Grade Steel Zinc Plating DIN 912 Hex Socket Head Cap Screws Diameter : M3- M16 Material : Carbon steel Finish : Blue/yellow zinc plated Length : 6 – 100mm OEM : Offer Prices vary in different sizes, please contact us before order!
Materials: Carbon steel, Stainless steel Size: Customized as per detailed sizes or drawings MOQ: 1,000pcs above, depends on products or dimensions Sample lead time: 3-7 working days mostly Massive lead time: 10-15 working days mostly Trade terms: EXW/FOB/CIF/CNF/FCA/DAP/DDP/DDU Package: PE bags + brown carton + pallets or customized as demands
