| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
A hinge is a mechanical device used to connect two solids and allow for relative rotation between them. It is usually composed of movable components or foldable materials. The main function of the hinge is to assist in the opening and closing of the cabinet, by connecting the rotating pair, so that the door or cover can swing on the fixed frame. According to different installation positions, hinges can be divided into door hinges and cabinet hinges. Door hinges are used to allow doors to rotate naturally and smoothly to open and close, while cabinet hinges have more functions and designs, such as rotating 360 degrees, adjusting the gap between doors up, down, and left and right.
Standard GB, DIN, ISO, BSW, UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product Wheel / Lug Nut Standard ASTM / ANSI / ISO / DIN Material Carbon Steel, Stainless Steel, Alloy Steel Mark According to customer’s requirement Size Any size Package Cartons&pallets or according to customer’s requirement.
Product name: SPLIT PIN Grade: 4.8-10.9 Diameter: 1.6~7.1 Surface treatment: Black,zinc plated,zinc(yellow)plated,H.D.G ,Dacroment Material: stainless steel,alloy steel,steel Packing: 25kgs per box,36 boxes per pallet,900kgs per pallet. Sample: Sample are free. Standard: DIN, ANSI, GB, JIS, BSW, GOST Head mark: Customized
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Double Fold Self Locking Washer Material: carbon steel, stainless steel, etc. Size: M5-M39, 1/4”-1-1/2”,etc. Standard: DIN25201,GB/T955 Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, black oxide, plain, etc.
Metal Stamping parts products Building hardware stamping parts Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Standard GB, DIN, BSW, ASTM, ASME Size M3-M50 or non-standard as request&design ASTM A193 B7 1/4″×13-1/4″×102, 5/16″×13-5/16″×152, 7/16″×25-7/16″×100 3/8″×13-3/8″×152, 1/2″×19-1/2″×152, 5/8″×32-5/8″×300, 3/4″×38-3/4×300 7/8″×50-7/8″×300 Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
A hinge is a mechanical device used to connect two solids and allow for relative rotation between them. It is usually composed of movable components or foldable materials. The main function of the hinge is to assist in the opening and closing of the cabinet, by connecting the rotating pair, so that the door or cover can swing on the fixed frame. According to different installation positions, hinges can be divided into door hinges and cabinet hinges. Door hinges are used to allow doors to rotate naturally and smoothly to open and close, while cabinet hinges have more functions and designs, such as rotating 360 degrees, adjusting the gap between doors up, down, and left and right.
Standard GB, DIN, ISO, BSW, UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product Wheel / Lug Nut Standard ASTM / ANSI / ISO / DIN Material Carbon Steel, Stainless Steel, Alloy Steel Mark According to customer’s requirement Size Any size Package Cartons&pallets or according to customer’s requirement.
Product name: SPLIT PIN Grade: 4.8-10.9 Diameter: 1.6~7.1 Surface treatment: Black,zinc plated,zinc(yellow)plated,H.D.G ,Dacroment Material: stainless steel,alloy steel,steel Packing: 25kgs per box,36 boxes per pallet,900kgs per pallet. Sample: Sample are free. Standard: DIN, ANSI, GB, JIS, BSW, GOST Head mark: Customized
