| Standard | GB, DIN, ISO, BSW,UNC |
| Size | M3-M50 or non-standard as request&design |
| Material | Carbon steel, stainless steel, alloys steel etc. |
| Hex head bolt and nut Grade | 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 |
| Packing | Box, carton or plastic bags, then put on pallets, or according to the demand of the customers |
High strength hexagonal bolts are a type of metal accessory typically made of high-strength steel, with high tensile and compressive strength, suitable for applications that require high loads. The characteristics of this type of bolt include high strength, durability, and the ability to maintain fastening even in harsh environments such as heavy loads and vibrations. The application range of high-strength hexagonal bolts is wide, including but not limited to the connection of bridges, steel rails, high and ultra-high voltage equipment. In order to ensure the sealing of the container on ultra-high pressure equipment, high-strength hexagonal bolts need to be subjected to significant pre stress. In addition, the installation of high-strength external hexagon bolts usually adopts a method that does not require rework, and can be quickly connected even under insufficient conditions
High strength hexagonal bolts can be classified into various types based on their performance levels and application scenarios. For example, GB5783 high-strength 8.8 grade carbon steel hexagon bolt is a type of high-strength hexagon bolt in the national standard category, widely used in factories, mines, steel structure engineering and other occasions. Its performance level is 8.8 grade, the material is high-strength carbon steel, and it has good tensile strength and high-strength tensile performance.
Overall, high-strength external hexagonal bolts play an important role in various environments that require heavy loads and vibrations due to their high strength, durability, and quick installation characteristics. They are one of the indispensable fasteners in industrial manufacturing, construction engineering, and other fields.
Standard for high-strength hexagonal bolts
The standards for high-strength hexagonal bolts mainly include the national standards GB5783-86 and GB/T1228-2006. These standards specify the technical requirements for bolt size, material, strength grade, etc., ensuring the quality and performance of bolts.
Specific content of the standard
The specific contents of these standards include:
Thread diameter (d): The nominal diameter of the threaded portion of the bolt.
Bolt length (L): The length from the lower plane of the bolt head to the end of the bolt.
Pitch (P): The distance between threads (usually divided into coarse and fine threads).
Head to side width (S): The width of the opposite side of a hexagonal head.
Head height (K): The height of a hexagonal head.
Materials and strength grades: such as carbon steel, stainless steel, alloy steel, etc., and their strength grades (such as 4.8, 8.8, 10.9, 12.9, etc.).
Scope and Importance of Standard Application
These standards are widely used in the fields of architecture and engineering, especially in situations where high-strength connections are required. For example, in the structural connections of bridges and buildings, high-strength external hexagonal bolts can provide sufficient fastening force and tensile strength to ensure the safety and stability of the structure.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Spring Washer Material: carbon steel, stainless steel,brass, etc. Size: M2-M100, 1/4-2-1/2 Standard: DIN127, ASTM, ISO Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, black oxide, plain, etc.
Product name Butterfly nut texture of material SS304 SS316 stainless steel，mild steel, Carbon steel,1018,1022,10B21,SCM435,12L14, 1215,4140, 4340, 5120,5140,5145, etc. standard ASME ISO DIN BS Grade A2 A4 or grade 2 5 8 10 Surface plain, zinc plated, hot dip galvanized ,black oxide packing Plastic bag / carton
A hinge is a mechanical device used to connect two solids and allow for relative rotation between them. It is usually composed of movable components or foldable materials. The main function of the hinge is to assist in the opening and closing of the cabinet, by connecting the rotating pair, so that the door or cover can swing on the fixed frame. According to different installation positions, hinges can be divided into door hinges and cabinet hinges. Door hinges are used to allow doors to rotate naturally and smoothly to open and close, while cabinet hinges have more functions and designs, such as rotating 360 degrees, adjusting the gap between doors up, down, and left and right.
item 8.8 High Tensile Black Oxide Flat Washer Finish Black, ZINC, Plain Style flat washer Material Stainless Steel, Steel Application Heavy Industry, Retail Industry, General Industry Place of Origin HEB Model Number 6-30 Standard DIN Material Stainlesss Steel， Carbon Steel Surface treatment White Zinc .Yellow Zinc. HDG MOQ 5000pcs Grade 4.8/ 8.8/ 10.9/ 12.9 Ect
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
A double-stacked self-locking washer is a special mechanical connector designed to prevent bolts from loosening, especially in high-vibration or high-load environments.It consists of two spring washers nested inside each other in an S-shaped configuration. The outer spring washer has ends that bend inwards, while the inner spring washer has ends that bend outwards, creating a two-way self-locking feature.The working principle of this washer is based on elastic deformation. When placed between connecting parts, the inner curved part of the outer spring ring interlocks with the outer curved part of the inner spring ring, creating a locking force that prevents the connecting parts from loosening under vibration or load.The advantages of the double-stacked self-locking washer include high reliability, easy installation, and a wide range of applications.It is suitable for various mechanical connections, such as threaded connections and pin connections, and is widely used in industrial production and machinery manufacturing, especially in the automotive manufacturing process, where it is often used to connect engine and chassis systems to improve the safety and reliability of the car.
Products Socket Head Cap Screws Material carbon steel, stainless steel, Alloy Steel . Standard DIN912 /ISO4762 Diameter M2-M48 Length 4mm-400mm Pitch 0.4mm 0.45mm 0.5mm 0.7mm 0.8mm 1mm 1.25mm 1.5mm 1.75mm 2.0mm 2.5mm 3.0mm Finish Zinc Plated .Black Oxide,etc. Grade 4.8, 8.8 Grade. 10.9 Grade.12.9 Grade Head Type Cylindrical Hexagon Socket Cap Head Thread Type Fully Threaded , Partially Thread Features Exceptional strength and durability,High Tensile ,Corrosion-resistance Abrasion-resistance .Anti-rust.Easy installation Application Ideal for use in automotive.construction. Machinery.and other industries fastening applications where high-strength fasteners are needed Packing Poly bags.Box.Cartons.Wooden Pallets
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Product name Manufacturer ring grip quick release pins coiled spring pins stainless steel ball lock pin shaft Size M1-M48,According to the drawing provided by the customer. Grade 4.8, 6.8, 8.8, 10.9, 12.9, A2-70, A4-80 Standard ISO, GB, BS, DIN, ANSI,JIS, Non-standard Material 1. Stainless steel: 201,303,304,316,410 2. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045 3. Copper: H62,H65,H68 4. Aluminum: 5056, 6061, 6062, 7075 5. According to customer demand Surface treatment Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodize,Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G. ) etc. Package Plastic bag / small box +outer carton +pallets After-sales Service We will follow up every customer and solve all your problems satisfied after sales
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Spring Washer Material: carbon steel, stainless steel,brass, etc. Size: M2-M100, 1/4-2-1/2 Standard: DIN127, ASTM, ISO Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, black oxide, plain, etc.
Product name Butterfly nut texture of material SS304 SS316 stainless steel，mild steel, Carbon steel,1018,1022,10B21,SCM435,12L14, 1215,4140, 4340, 5120,5140,5145, etc. standard ASME ISO DIN BS Grade A2 A4 or grade 2 5 8 10 Surface plain, zinc plated, hot dip galvanized ,black oxide packing Plastic bag / carton
