| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product Name Stainless Steel T-Bolt/T head bolt Size m10x75 m6 m12 m8 m9 m12 m20 m29 Grade 4.6,4.8,5.6,6.8,8.8,9.8,10.9,12.9,etc Available Material 304 stainless steel,plastic,brass,carbon steel,titanium,aluminum,etc Surface treatment Zinc plated,Black oxide,Phosphate,Dacroment,etc Standard ISO,BS,ANSI, GB,DIN,JIS,Nonstandard Advantage OEM / ODM / customized service provided Quality control ISO standard,100% Whole range inspection through the production Certificate ISO9001,ISO14001,IATF16949,ROHS,etc
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
size M2- M30 Material Carbon Steel, Stainless Steel, Titanium, Aluminum, Brass, etc Surface Treatment Plain, black, zinc plated/according to your requirement Standard DIN GB ISO JIS BA ANSI Grade SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8 8.8 10.9 12.9 Quality Policy All the parts manufactured 100% inspection from OQC before shipping. Thread Coarse, fine Used Building industry machinery electronic,etc Non-standards OEM is available, according to drawing or samples
Flat Head Self Drilling Screw, Csk Head Phillips Drive Self Drilling Screws Size:M3.5-M6.3 Length:25mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,etc.
Bracket Metal Stamping parts products Can be made into different size according to customer’s requirements. Material: carbon steel, stainless steel,aluminum,copper,etc. Finish: white zinc plated, blue zinc plated, etc.
Product Hexagon flange bolt Size M5-M20 Grade 4.8; 8.8; 10.9; 12.9; etc. ASME&AISI: 2; 5; 8 Material stainless steel, carbon steel Surface treatment Zinc plated, hot dip galvanized, black, Dacromet, etc. Standard DIN GB ISO JIS BA ASME ANSI ASTM Thread unc, unf, metric thread Usage building industry machinery Certification ISO9001, SGS, CTI, ROHS
Product name Butterfly nut texture of material SS304 SS316 stainless steel，mild steel, Carbon steel,1018,1022,10B21,SCM435,12L14, 1215,4140, 4340, 5120,5140,5145, etc. standard ASME ISO DIN BS Grade A2 A4 or grade 2 5 8 10 Surface plain, zinc plated, hot dip galvanized ,black oxide packing Plastic bag / carton
item connecting nut Application Heavy Industry, General Industry, Automotive Industry Material carbon steel, stainless steel Size M6 M8 M10 M12 M16 Packing Cartons and pallets or according to customer’s requirements Advantages: Factory direct selling and competitive price Delivery method: Air, sea or express, such as EMS, UPS, TNT etc
A double-stacked self-locking washer is a special mechanical connector designed to prevent bolts from loosening, especially in high-vibration or high-load environments.It consists of two spring washers nested inside each other in an S-shaped configuration. The outer spring washer has ends that bend inwards, while the inner spring washer has ends that bend outwards, creating a two-way self-locking feature.The working principle of this washer is based on elastic deformation. When placed between connecting parts, the inner curved part of the outer spring ring interlocks with the outer curved part of the inner spring ring, creating a locking force that prevents the connecting parts from loosening under vibration or load.The advantages of the double-stacked self-locking washer include high reliability, easy installation, and a wide range of applications.It is suitable for various mechanical connections, such as threaded connections and pin connections, and is widely used in industrial production and machinery manufacturing, especially in the automotive manufacturing process, where it is often used to connect engine and chassis systems to improve the safety and reliability of the car.
Standard GB, DIN, ISO, BSW, UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product Name Stainless Steel T-Bolt/T head bolt Size m10x75 m6 m12 m8 m9 m12 m20 m29 Grade 4.6,4.8,5.6,6.8,8.8,9.8,10.9,12.9,etc Available Material 304 stainless steel,plastic,brass,carbon steel,titanium,aluminum,etc Surface treatment Zinc plated,Black oxide,Phosphate,Dacroment,etc Standard ISO,BS,ANSI, GB,DIN,JIS,Nonstandard Advantage OEM / ODM / customized service provided Quality control ISO standard,100% Whole range inspection through the production Certificate ISO9001,ISO14001,IATF16949,ROHS,etc
Cross recessed pan head self drilling screw Size:M4.2-M4.8 Length:12mm-50mm Material: carbon steel Finish: white zinc plated, blue zinc plated,yellow zinc plated, etc.
