| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
Drywall screw, tapping screw Size:M2.9-M4.8 Length:12mm-55mm, 1-3/4”～3”. Material: carbon steel Finish: white zinc plated, blue zinc plated, black phosphating , etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, BSW,UNC Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Name: Clevis Pin with Hole Pivot Pin Material: Stainless Steel Pin Diameter: M4-M16 Length: 8-50 OEM: Available
Material Carbon Steel / stainless steel/Zinc/Black/Customized Color Black / Blue / Yellow Zinc Plated / Plain Standard DIN,ASME,ASNI,ISO Finished Zinc Plated,Hot Dip Galvanized Steel,Dacromet,Nickel Plated,Black Oxide,Plain Mark According to customer’s requirement Delivery time Normally in15-30 days. Package Cartons&pallets or according to customer’s requirement.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Material:Nylon/PVC/PU/carbon steel/stainless steel Place of Origin:Handan, China Tyle:Rigid, SWIVEL, Swivel & Rigid,Plate Casters Usage Wide Usage Packaging and delivery Packaging Details caster wheels,all goods simple pack in the carton with poly bag or as customer’s request Customized support OEM,ODM
Drywall screw, tapping screw Size:M2.9-M4.8 Length:12mm-55mm, 1-3/4”～3”. Material: carbon steel Finish: white zinc plated, blue zinc plated, black phosphating , etc.
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
