| Application | General Industry |
| Product name | hex lock nuts |
| Size | M4-M24, 3/16″-3/4″ |
| MOQ | 1.9MT |
| Type | Lock Nuts |
| Standard | DIN, ISO, ASTM,UNC, BSW, ASME |
Nylon lock nut is a nut made of nylon material, with a galvanized outer layer, which has the characteristics of anti-loosening, corrosion resistance, high temperature resistance and light weight. Its working principle is to hold the bolt tightly through the elastic deformation of the nylon washer, so as to achieve the effect of locking and anti-loosening.
Features
1. Anti-loosening: Nylon locking nut can prevent the thread from loosening after tightening, and improve the reliability and safety of tightening.
2. Corrosion resistance: The galvanized layer can prevent the surface of the nut from oxidation and corrosion, and extend the service life.
3. High temperature resistance: Nylon material has high temperature resistance and can maintain its fastening performance in high temperature environment.
4. Lightweight: Nylon material is lighter than metal material, suitable for scenes with high requirements for lightweight.
Usage scenario
Nylon locking nuts are widely used in the fastening of various mechanical equipment and components, especially in the following scenes:
1. Scenes that require anti-loosening and corrosion resistance: such as automobiles, ships, aircraft, chemical equipment, etc.
2. Scenes where lightweight requirements need to be met: such as electronic products, aerospace equipment, stage equipment, etc.
3. Scenes where it needs to be used in high temperature environments: such as heat treatment equipment, hot air furnaces, boilers, etc.
4. Scenes where it needs to be used in humid environments: such as marine engineering, water conservancy equipment, etc.
Manufacturing process and materials
Nylon locking nuts usually consist of two parts: hexagonal nuts and nylon rings. The nylon ring relies on its elastic deformation to lock the bolt. The commonly used material is nylon, because of its good fatigue resistance, good heat resistance, low friction coefficient and good wear resistance, and the use temperature is within 120 degrees.
Flat Washer Material: carbon steel, stainless steel,brass, etc. Size: M2-M64, 1/4-2-1/2 Standard: DIN125,ASTM F436 ,ISO 7089,GB/T97 Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, plain,black oxide, etc.
Product Hexagon flange bolt Size M5-M20 Grade 4.8; 8.8; 10.9; 12.9; etc. ASME&AISI: 2; 5; 8 Material stainless steel, carbon steel Surface treatment Zinc plated, hot dip galvanized, black, Dacromet, etc. Standard DIN GB ISO JIS BA ASME ANSI ASTM Thread unc, unf, metric thread Usage building industry machinery Certification ISO9001, SGS, CTI, ROHS
Production name Wedge anchor bolt Standard DIN,ASTM/ANSI JIS EN ISO,AS,GB Material Stainless Steel: SS304, SS316, SS316L, Carbon Steel:DIN:Gr.4.8,8.8,10.9,12.9; Surface Zinc(Yellow,White,Blue,Black),Hot Dip Galvanized(HDG),Black, Geomet,Dacroment,Anodization,Nickel plated,Zinc-Nickel plated,Gleitmo615;PTFE(Blue,red) Production Process Machining and CNC for Customized fastener Customized Products Lead time Busy season:30-45days,Slack seaon:10-20days;In stock Package Small Packing+Carton Packing+Pallet/wooden case
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
-dewell fastener factory provides bolt and nut.washer.Metal Stamping products.Caster wheels.lifti...
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Standard GB, DIN, ISO, ASTM, ASME, UNC,BSW Size M3-M50 or non-standard as request&design 1/4″,1/2″, 1-1/2″, 5/16″,7/16″, 5/8″, 1-1/4″, 3/4″, 3/8″, 1″ Material Carbon steel, stainless steel, alloys steel etc. Grade 4.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product name: SPLIT PIN Grade: 4.8-10.9 Diameter: 1.6~7.1 Surface treatment: Black,zinc plated,zinc(yellow)plated,H.D.G ,Dacroment Material: stainless steel,alloy steel,steel Packing: 25kgs per box,36 boxes per pallet,900kgs per pallet. Sample: Sample are free. Standard: DIN, ANSI, GB, JIS, BSW, GOST Head mark: Customized
Standard GB, DIN, ISO, JIS Size M3-M50 or non-standard as request&design Material Carbon steel, stainless steel, alloys steel etc. Hex head bolt and nut Grade 4.8 / 6.8 / 8.8 / 10.9 / 12.9 , A2-70 / A4-80 Packing Box, carton or plastic bags, then put on pallets, or according to the demand of the customers
Product name Butterfly nut texture of material SS304 SS316 stainless steel，mild steel, Carbon steel,1018,1022,10B21,SCM435,12L14, 1215,4140, 4340, 5120,5140,5145, etc. standard ASME ISO DIN BS Grade A2 A4 or grade 2 5 8 10 Surface plain, zinc plated, hot dip galvanized ,black oxide packing Plastic bag / carton
Product Name U-bolt Package BAG/BOX Grade 4.6,4.8,5.6,6.8,8.8,9.8,10.9,12.9,etc Available Material 304 stainless steel,plastic,brass,carbon steel,titanium,aluminum,etc Surface treatment Zinc plated,Black oxide,Phosphate,Dacroment,etc Standard ISO,BS,ANSI, GB,DIN,JIS,Nonstandard Advantage OEM / ODM / customized service provided Quality control ISO standard,100% Whole range inspection through the production Certificate ISO9001,ISO14001,IATF16949,ROHS,etc
Flat Washer Material: carbon steel, stainless steel,brass, etc. Size: M2-M64, 1/4-2-1/2 Standard: DIN125,ASTM F436 ,ISO 7089,GB/T97 Finish: white zinc plated, yellow zinc plated, blue zinc plated, Hot-dip galvanized, plain,black oxide, etc.
Product Hexagon flange bolt Size M5-M20 Grade 4.8; 8.8; 10.9; 12.9; etc. ASME&AISI: 2; 5; 8 Material stainless steel, carbon steel Surface treatment Zinc plated, hot dip galvanized, black, Dacromet, etc. Standard DIN GB ISO JIS BA ASME ANSI ASTM Thread unc, unf, metric thread Usage building industry machinery Certification ISO9001, SGS, CTI, ROHS
Production name Wedge anchor bolt Standard DIN,ASTM/ANSI JIS EN ISO,AS,GB Material Stainless Steel: SS304, SS316, SS316L, Carbon Steel:DIN:Gr.4.8,8.8,10.9,12.9; Surface Zinc(Yellow,White,Blue,Black),Hot Dip Galvanized(HDG),Black, Geomet,Dacroment,Anodization,Nickel plated,Zinc-Nickel plated,Gleitmo615;PTFE(Blue,red) Production Process Machining and CNC for Customized fastener Customized Products Lead time Busy season:30-45days,Slack seaon:10-20days;In stock Package Small Packing+Carton Packing+Pallet/wooden case
